Products Product detail

KLJZF Welded Plastic-head Pneumatic Angle Seat Valve

KLJZF welded pneumatic angle seat valve for permanent process piping, with sanitary-tube and industrial-tube dimension references from the catalog. This card is specifically for the polyamide plastic-head actuator version.

Kailing KLJZF welded plastic-head pneumatic angle seat valve
PUBLISHED PRODUCT

Use welded KLJZF when the piping is intended to be permanent and the buyer can confirm sanitary or industrial tube dimensions.

Product Features Published highlights
  • 01
    Visible valve position

    The actuator provides an open and closed position indication for quick operating checks.

  • 02
    External pneumatic pilot

    External pneumatic pilot control is designed to extend service life and reduce maintenance.

  • 03
    Self-adjusting seal compression

    The overflow port and sliding-block structure automatically adjust seal compression to improve sealing performance.

  • 04
    High-flow Y-shaped body

    The Y-shaped valve body combines a high-flow path with compact response.

Ordering Code Product configuration
KLJZF-15-50-SS-W-PTFE-1-H
KLJZF Series
  • KLJZF: Kailing angle seat valve
DN15-DN100 Nominal diameter
  • Catalog nominal size range; confirm DN125 rows before quotation
Blank / SS316 Body material
  • Blank: SS304
  • SS316: SS316
Blank Actuator material
  • Blank: Polyamide plastic-head actuator
W Connection form
  • W: welded
Blank / V Seal
  • Blank: PTFE
  • V: FKM option listed in catalog code
Blank / 2 / 3 / 4 Action and flow direction
  • Blank: single acting normally closed
  • 2: double acting normally closed
  • 3: normally open
  • 4: double acting without return spring
Blank / HT Environment
  • Blank: normal temperature sealing parts
  • HT: high-temperature sealing parts
G / ZG / NPT Thread type
  • Used for threaded version; omitted for F/Q/W connection forms
P / L Options
  • P: positioner
  • L: limit switch

Selection use

Use welded KLJZF when the piping is intended to be permanent and the buyer can confirm sanitary or industrial tube dimensions.

Flow direction

For liquid service, the catalog recommends selecting low-in/high-out where water-hammer prevention is needed and keeping working pressure below 0.3MPa unless a double-acting actuator is selected. For steam or gas service, high-in/low-out can improve sealing, but service life should be reviewed.

RFQ confirmation points

Ask for medium, temperature, pressure, tubeOutsideDiameter, tubeStandard, bodyMaterial, actuatorMaterial, airSupplyPressure, flowDirection, quantity. Include photos of the current valve or pipe connection when replacing an installed unit.

Technical Specifications Published data
ParameterValue
Valve familyKLJZF two-way two-position piston angle seat valve
Media temperature-10C to +180C
Ambient temperature-10C to +60C
Nominal pressure1.6MPa
Control gasNeutral gas and air
Air supply pressure0.4-0.8MPa
Catalog size rangeDN15-DN100; some dimension tables include DN125 rows that should be confirmed before quotation
Body materialSS304 or SS316
Seal materialPTFE; catalog ordering code also lists FKM and high-temperature seal options
Actuator materialPlastic-head actuator or stainless steel actuator
Flow-direction noteThe catalog distinguishes low-in/high-out water-hammer prevention from high-in/low-out steam or gas sealing use
Connection formWelded
Actuator materialPolyamide plastic-head actuator
Ordering-code connectionW: welded
Technical Specifications Published tables

KLJZF Welded Plastic-head Pneumatic Angle Seat Valve dimensions - non-dimensional catalog fields

ModelSanitary LSanitary dSanitary DIndustrial LIndustrial dIndustrial DActuatorWater hammer
DN10/Phi131209.712.71208.514.2Phi50Phi50
DN15/Phi1913016.0519.05133.815.120.5Phi50Phi50
DN20/Phi2513022.425.413421.126.2Phi50Phi50
DN25/Phi3214028.831.814327.133.4Phi50/Phi63Phi63
DN32/Phi3815035.138.115433.339.4Phi63Phi80
DN40/Phi4518042451834047.8Phi63Phi80
DN40/Phi5118047.850.818246.853Phi63Phi80
DN50/Phi571955357197.651.159Phi63/Phi80Phi100
DN50/Phi6319559.563.519757.664.8Phi80Phi100
DN65/Phi7623072.176.12336878.8Phi80Phi125
DN80/Phi8925084.988.92528292.5Phi100Phi125
DN100/Phi108280104108282101112Phi100Phi125
DN125/Phi133330129133330126137Phi125Confirm

Confirm sanitary tube or industrial tube dimensions before welding or quoting replacement units.

Connection form evidence

ConnectionOrdering codeSourceWebsite use
ThreadedBlank connection codePDF page 14Pipe-thread process lines
FlangedFPDF page 15Flange-connected process piping
Tri-clampQPDF page 16Quick-disassembly or sanitary-style piping
WeldedWPDF page 17Permanent welded process piping
Dimensions Reference tables

KLJZF Welded Plastic-head Pneumatic Angle Seat Valve dimensions

ModelSanitary LSanitary dSanitary DIndustrial LIndustrial dIndustrial DAHEActuatorWater hammer
DN10/Phi131209.712.71208.514.218516665Phi50Phi50
DN15/Phi1913016.0519.05133.815.120.517816665Phi50Phi50
DN20/Phi2513022.425.413421.126.218617465Phi50Phi50
DN25/Phi3214028.831.814327.133.4191/212185/20565/80Phi50/Phi63Phi63
DN32/Phi3815035.138.115433.339.422621580Phi63Phi80
DN40/Phi4518042451834047.823922680Phi63Phi80
DN40/Phi5118047.850.818246.85324723080Phi63Phi80
DN50/Phi571955357197.651.159253/271246/26380/100Phi63/Phi80Phi100
DN50/Phi6319559.563.519757.664.8279262100Phi80Phi100
DN65/Phi7623072.176.12336878.8301290100Phi80Phi125
DN80/Phi8925084.988.92528292.5355349130Phi100Phi125
DN100/Phi108280104108282101112382389130Phi100Phi125
DN125/Phi133330129133330126137478540130Phi125Confirm

Confirm sanitary tube or industrial tube dimensions before welding or quoting replacement units.

Frequently Asked Questions

  • FAQ When should buyers choose Welded KLJZF?
    Use welded KLJZF when the piping is intended to be permanent and the buyer can confirm sanitary or industrial tube dimensions.
  • FAQ What air supply does KLJZF require?
    The catalog lists neutral gas or air as the control gas and 0.4-0.8MPa as the air supply pressure.
  • FAQ Can Kailing quote by model name only?
    A model name helps, but the buyer should confirm medium, temperature, pressure, connection standard, body material, actuator material, flow direction and quantity before RFQ.

Need a quotation?

Send the model, medium, pressure, port size, body material and quantity for review.

Send RFQ →