PUBLISHED PRODUCT
PHF Push-in Fitting is maintained as its own catalog product card. It must not be merged into a broad fitting, tubing, silencer or tool gallery.
Ordering Code Product configuration
PHF - Catalog family: PHF Push-in Fitting
- PHF
- model
- tubeOuterDiameter
- threadIfAny
- threadStandard
- geometry
- quantity
Use this focused tube-system page
Use this page when the inquiry names PHF Push-in Fitting or related examples such as PHF.
RFQ confirmation points
Ask for model, tubeOuterDiameter, threadIfAny, threadStandard, geometry, quantity. A buyer photo is helpful when replacing existing fittings or tubing.
Technical Specifications Published data
| Parameter | Value |
|---|---|
| Working medium | Air and vacuum where listed in the fitting section |
| Working pressure | 0-10.2kgf/cm2 / 0-1.0MPa for push-in fitting section |
| Vacuum reference | -750mmHg / 10Torr |
| Proof pressure | 15.3kgf/cm2 / 1.5MPa |
| Temperature | 0C to 60C |
| Compatible tube | Nylon and PU tube references |
| Evidence boundary | Use catalog examples for selection; confirm current drawing, thread standard and quantity before quotation |
| Catalog family | PHF |
| Fitting group | Push-in fitting |
Technical Specifications Published tables
PHF Push-in Fitting quick reference
| Example | Size / OD | Thread / material / form | Use |
|---|---|---|---|
| PHF | See catalog | Push-in fitting | PDF page 240 |
Use as selection evidence only; request exact drawing, current catalog confirmation and quantity for final quotation.
PHF Push-in Fitting source evidence
| Family | Examples | Evidence | Source pages |
|---|---|---|---|
| PHF Push-in Fitting | PHF | Kailing Chinese catalog page 240 shows PHF as an individual product. The client acceptance workbook requires one product per card for catalog pages 172-187. | 240 |
Frequently Asked Questions
- FAQ Which catalog pages support PHF Push-in Fitting?
This product detail is based on Kailing catalog page 240. - FAQ What should the buyer send for a fast quotation?
Send exact model if available, plus model, tubeOuterDiameter, threadIfAny, threadStandard, geometry, quantity.
Need a quotation?
Send the model, medium, pressure, port size, body material and quantity for review.